•

Conventional Doors
-----------------------

•

Stacking Door
-----------------------

•

Corner Unit
-----------------------

•

Hardware
-----------------------

•

Performance
-----------------------

SlideMASTER™ Door

The SlideMASTER™ is the ultimate sliding door for performance and appearance.

Show me the matching SlideMASTER™ Window Large Doors: The Series 702 SlideMASTER™ can cater for most applications. Door panels can be up to just under five square metres, this equates to a two panel door 2400mm high by 3800mm wide. Extra Wide Opening: Stacking sliding doors open to approximately two-thirds of their width compared to standard sliding door which opens to less than half its width. Two sliding panels stack in front of the third fixed panel. Two Stacking Options: They come as either a three panel unit, with stacking panels, or as a six-panel unit, with two panels moving towards one jamb and two towards the other. Glazing: The SlideMASTER™ will accept single glazing up to 10.38mm laminated plus 20mm and 25mm insulating glass units (IGU's).

Very High Performance: We have successfully tested doors for compliance with Australian Standard AS2047 with a water resistance rating of 600Pa. There are meeting stiles to allow us to offer large doors in most exposed applications in Australia. Quality Hardware: From the mortice locks to the heavy duty wheels this door has been designed for the task. Flydoors: We can fit sliding flydoors (including stacking flydoors) on the inside.

	Fixed Sidelights: Vantage 'Front Glaze' snaps to SlideMASTER™ and has also been tested to 600Pa water.
	Design Registration: SlideMASTER™ is protected by Australian Registered Design.