 |
|---|
 |
SLIDING WINDOWS
10090 90° Corner Coupler
This coupler is designed to join 50mm windows to eachother at 90°.
Clean water resisting, snap together coupling, no ugly rivets or metal pressings required. Non-load bearing coupler, can’t be used to support the weight of roof over. If you have to support the roof use 10022 with 102mm frames and steel load bearing post. An engineer’s certificate would be required to confirm that the 76mm post is strong enough.
Important Note:
Aluminium couplers without steel inserts are non-load
bearing (can’t be used to support the building above).
For corner window layouts refer installation section.
42022 90° Corner Coupler
This coupler is designed to join 102mm windows or doors
to each other at 90°.
The coupler will also allow 50mm windows to be clipped to
102mm doors.
The box coupler will accept 76mm load bearing steel
columns as detailed left.
