Handle Lay-back: ICON™ handles are laid back 5° to make sure the handle misses the other stile / frame as the door is opened and closed.

Bolt Guides: Custom moulded bolt guides nest into stiles and hold the bolt in the correct location to engage the keepers.

•

Bolt Adjustment: To adjust the length of shoot bolts firstly remove the bolt guide. Both extension rod clips into motor, turn 90* to remove then remove nylon shoot bolt and cut back extension rod as required. When the correct bolt extension is achieved replace the bolt guide.

Important Note: Shoot bolts should be adjusted so they are not under compression as this could damage the lock motor.

•

Adjustable Keepers: The centre core of the keepers can be rotated to tighten/loosen the panels in the frame.

•

Go to matching ICON™ bi-fold activator.