Handle Lay-back: ANDO™ handles are laid back 5° to make sure the handle misses the other stile / frame as the door is opened and closed.

Bolt Guides: Custom moulded bolt guides nest into stiles and hold the bolt in the correct location to engage the keepers.

Bolt Adjustment: To adjust the length of shoot bolts firstly remove the bolt guide. As the stainless steel shoot bolt is threaded onto extension rod it can be adjusted as required by rotating. When the correct bolt extension is achieved replace the bolt guide.

Important Note: Shoot bolts should be adjusted so they are not under compression as this could damage the lock motor.

Adjustable Keepers: The centre core of the keepers can be rotated to tighten/loosen the panels in the frame (Series 548).