Series 542 DStacker Sliding Door

Standard rails and stiles with glazing channel adaptor:
•	20mm Insulating Glass Unit - two sheets of 5mm toughened seperated by 10mm spacer. To reduce thermal transmission.
Optional Meeting Stile Closers
The illustration on this page show the optional meeting stile closers that can be snapped into the internal stile, Go to strength page for pictures of both alternatives.’

Series 542 DStacker™ Sliding Door
Glazing Options
Series 542 door will accept a variety of glass thicknesses.
Standard single glazing:
•	4mm Toughened glass - used in small doors in low wind load areas.
•	5mm Toughened glass - the most common glass thickness used in most wind load areas.
•	6.38mm Laminated glass - Not as strong as toughened glass but has good security and UV transmission properties.
•	6.76mm Laminated glass - Similar to 6.38mm but with a 0.76mm thick membrane separating the glass.
•	7.52mm Laminated glass - Similar to 6.38mm but with a 1.52mm thick membrane separating the glass.
The alternative wide jaw stiles and rails will accept a variety of thicker glass types:
•	8.38mm Laminated glass - designed for very high wind load areas.
•	10.38mm Laminated glass - will give higher sound reduction than 6.38mm.
•	16mm Insulating Glass Unit - two sheets of 4mm toughened seperated by 8mm spacer -ideal for reducing thermal transmission.